Talk of consistency and smooth ingredients and the best blender does it all. However, with extensive use, your blender can run into some troubles. The most common issue is the blender not spinning. So, which quick fixes can help solve the problem?

Check whether your blender is connected to a power source, ensure there is no clogging, and reassemble blender components correctly to fix the blender not spinning problem. Additionally, do not overfill your blender, ensure it has enough liquids, inspect the motor and the fuse, and replace any damaged parts with new ones.

Related: My Blender is Leaking From The Bottom

Reasons Your Blender Is Not Spinning

It is important to understand the cause of the problem with your blender. That way, you can come up with a long-lasting solution. Here are the possible reasons your blender is not spinning:

1. Insufficient Power Supply

Check your power supply connections to see if they are faulty or have any loose connections. When the electricity is dim, it may fail to spin the blender.

2. Clogged And Dirty Blender Blades

If you have stayed for long without cleaning your blender, food particles with other debris can build up in it. They may clog the blender blades hindering them from spinning.

3. Overfilling Your Blender

 If you put too much food in your blender, the blender blades may fail to spin the overload. That’s because the blender blades will not have enough room to enable them to rotate. Try reducing the amount of food in your blender and see if the blender blades will start to spin.

4. Inadequate Or No Liquid In The Blender Jar To Enable The Process

When you fill your blender jar with only hard ingredients, the blender blades may find it hard to spin, no matter how hard they try. At a point, you will hear your blender producing a groaning sound. That sound shows that it is straining to perform its functions.

To enable your blender to spin well and break down the hard ingredients, add to the ingredients some water.

5. Mechanical Issues

If your blender is clean and you use the right ingredients but won’t spin, it has a mechanical problem. These mechanical issues include a ruined motor, a damaged fuse, and a loose assembly.

How To Fix Blender Not Spinning

Are you experiencing this problem? Don’t throw away your blender yet. Just follow these few troubleshooting solutions, and get your blender back to its full potential in no time.

1. Inspect Your Power Connectivity

Immediately your blender fails to spin, the first thing to do is to inspect your power connections. Confirm if you have plugged in the power cord and turned it on. If that’s the case, but still your blender won’t spin, check your power switch if it is on.

You can also try using another power socket. Probably your blender has a small button on its front part. Next to it is a light that shows when you turn on your blending machine. Ensure you properly push the button. You can even do it multiple times to ensure that it is not stuck.

2. Check If All The Blender Components Are Assembled Correctly

If there is nothing wrong with your power supply, check if all the blender components are well-attached. They should be lining up with each other correctly and facing the right direction.

The best way would be to disassemble your blender. Then carefully reassemble, placing each part where it is supposed to be.

3. Inspect For Clogging Around The Blades And Clean

Check the blade housing and between the blades for any material clogging the area. Use a brush to scrub and clear them off. Remove anything that could block the moving parts before switching on your blender.

Besides, make sure you thoroughly clean all other sections of the blender. I recommend you clean your entire blender regularly to avoid debris buildup.

4. Don’t Overfill Your Blender Jar

Putting too much food in your blender at once overloads your blades. Besides, it ruins the texture and uniformity of the final product. The best way is not to exceed the maximum mark on your blender. Better still, you can fill your blender halfway or at a maximum of two-thirds.

5. Add Enough Liquid To Your Ingredients

Don’t try to blend dry ingredients without adding some liquid. You can even cause severe damage to your blender blades. Before you even turn on your machine, make sure there is enough liquid in your ingredients. It will enable the blender blades to spin swiftly.

6. Inspect The Fuse And The Motor

If none of the above seems to work, take time to check the fuse and the motor. If you can’t handle this repair by yourself, bring in an expert to do the job.

7. Replace Damaged Components

If you find any damaged blender component, buy a new one from the manufacturer and replace the old one.

Frequently Asked Questions (FAQs)

Final Thoughts

Your blender not spinning should not be a reason your family doesn’t drink juice or enjoy smoothies. Even so, proper maintenance and regular cleaning are vital to keeping it functional for a long time. If some of the parts have defects, replace them immediately. But if the damages are so intense, talk to your manufacturer or a qualified technician for guidance.