Blog, Nespresso

Nespresso Troubleshooting – Is Your Nespresso Machine Not Working?

Do you own a Nespresso machine? Chances are if you do you know that it makes some of the best coffee around. But even the best machines can have problems from time to time. In this blog post, we’ll outline some of the most common issues people have with their machines and provide Nespresso troubleshooting tips to help you get your machine up and running again. So whether your machine is flooding or not producing any coffee at all, keep reading for help!

Nespresso troubleshooting with common problems

1. My machine is leaking water

If your machine is leaking water or coffee, there are a few things you can check to troubleshoot the issue. First, make sure that the water tank is properly seated on the machine and that the lid is closed tightly. Next, check the drip tray to make sure it is empty and clean. If it is full or dirty, empty it and give it a good rinse under running water. Finally, check the water tank for any cracks or leaks. You notice any, replace the water tank with a new one. 

If the water tank is seated properly and all seals are intact, but your machine isn’t working, then the issue might be with the pump. To troubleshoot this, descale your machine according to the instructions in your owner’s manual. If that doesn’t work, replace the pumps.

nespresso troubleshooting
nespresso troubleshooting

2. There’s no coffee coming out

The average extraction time for a small cup of coffee using the Espresso button should be approximately 25-30 seconds. If no coffee is coming out within that time frame, then there might be an issue with the pump or water tank as mentioned above. On the other hand, check to see if the coffee beans are jammed in the grinding chamber. To do this, remove the brewing unit and turn it upside down. You should see a small metal ring that you can unscrew to access the grinding chamber. If the beans are jammed, use a small brush or another tool to clear them out.

Once you’ve checked for a jam and cleared it if necessary, screw the metal ring back on tightly and replace the brewing unit. Make sure that it is properly seated and locked into place before trying to brew again. 

Another possibility is that the coffee grind is too fine. To troubleshoot this, try using a coarser grind and see if that makes a difference.

If you still don’t have coffee after 300 brews, clean the machine as directed by Nespresso no matter what. If that doesn’t work, see if the pump or brewing unit needs to be replaced.

3. The coffee tastes bad

If the coffee from your machine tastes bad, it could be due to a number of different factors. Maybe the water in your area isn’t great, or maybe the coffee beans you’re using are old. To troubleshoot this, try using filtered water and fresh, high-quality coffee beans. If that doesn’t improve the taste of your coffee, then it’s possible that there’s something wrong with your machine. If you’re in this situation, follow the cleaning instructions outlined in your owner’s handbook.

4. The machine has no pressure

If your machine seems to have lost all pressure, it’s possible the air in the system needs to be purged. To correct this, we’ll need to run water through the machine a couple of times without a coffee capsule. You will do like below:

-Start by making sure the water tank is full and properly seated on the machine.

-Next, put a cup under the coffee spout.

-Press and hold the Espresso button for two seconds to start heating up the water.

-Once the water starts flowing, release the button and let the water run until the cup is full.

-Empty the cup and repeat this process two more times.

-Complete the last step two or three times, or until your machine is running smoothly again.

-After purging the air from the system, try making a coffee as usual. 

5. The machine doesn’t turn on

If you can’t get your machine to turn on, the first thing you should check is to make sure that it’s plugged in. If the machine has an issue, it’s generally because of a problem with the power cord or the outlet. To troubleshoot this, try plugging your machine into a different outlet. If that doesn’t work, then you may need to replace the power cord. Another thing worth mentioning is that most Nespresso machines have a power-saving mode. So, if you haven’t used your machine in a while, it may have turned itself off to save energy. In this case, simply press the power button to turn it back on again and wait for it to heat up.

6. Coffee is not hot enough

There are several reasons why your coffee may not be hot enough. Maybe the water tank is empty, or maybe the coffee grounds are old. To troubleshoot this, try using fresh, high-quality coffee beans and filtered water. In addition, you can fill up your coffee mug with boiling water, wait for thirty seconds, and then dump it out. Remember, descaling your Nespresso machine is important.

7. The machine is making weird noises

If your machine is making a strange noise, it could be due to a number of different things. First, check to make sure that nothing is blocking the path of the coffee pod holder. If there is something blocking it, remove it and try again. Next, check the grind setting on your machine. If it is set too fine, this can cause your machine to make a grinding noise when brewing. Finally, if your machine has an auto-off feature, make sure that it is turned off. If it is turned on, this can cause your machine to make a clicking noise as it tries to brew.

8. The machine keeps shutting off

If your machine keeps shutting off, it’s possible that the automatic shut-off feature has been turned on. To check this, look for a switch or button labeled “Auto Off” or something similar. If this is the case, simply turn it back to the “On” position.

9. The Nespresso coffee machine does not pierce the capsules

If your machine does not seem to be piercing the coffee capsules, there are a few things you can check. First, make sure that the coffee capsule is properly inserted into the machine. If it is not, then the machine will not be able to pierce it. Next, check to see if the needle is clean. If it is not, then it will not be able to puncture the capsule. It’s a tiny piece, and it can bend or break over time, so we don’t notice until the coffee extraction fails.

We always recommend using official Nespresso capsules. While there are many third-party options available, they are not always compatible with our machines and can result in a number of problems. For example, third-party capsules may not pierce properly, causing coffee to leak out and make a mess. In addition, some third-party capsules may not fit properly in the machine, causing it to make a grinding noise when brewing. If you are having trouble with third-party capsules, we recommend switching to official Nespresso capsules.

Before beginning, ensure that the coffee machine is turned on and has water in its reservoir. If not, the machine won’t be able to make the coffee.

10. The Nespresso coffee machine light is flashing

There are a few things that can cause the light on your machine to flash. First, check to see if the water tank is empty. If it is, then the light will flash to indicate that it needs to be refilled. Next, check to see if the coffee grounds container is full. If it is, then the light will flash to indicate that it needs to be emptied. You will need to empty it before the machine can continue brewing. Finally, check to see if the machine needs to be descaled. If it does, then the light will flash until the descaling process is complete. Make sure that the machine is turned on and that the power cord is plugged in. The machine cannot brew unless the button is in the ‘on’ position.

How do I descale Nespresso machine

Descaling is an important part of maintaining your Nespresso machine. Over time, calcium and other minerals can build up in the water tank and cause your machine to work less efficiently. In addition, these deposits can lead to a number of different problems, such as clogged pipes and decreased water pressure. To descale your machine, you’ll need to use a descaling solution. These solutions are typically made of citric acid and are designed to break down mineral deposits. You can find them at most hardware stores or online.

To use a descaling solution, simply follow the instructions on the package. In general, you’ll need to fill the water tank with the solution and let it sit for 30 minutes. After that, run the solution through your machine like you would with water. Once the solution has run through, rinse out the water tank and fill it up with fresh water. Run the water through your machine a few times to remove any residual solution. Finally, descale your machine every few months to keep it running smoothly. Nespresso recommends descaling your machine every 3-6 months, or more frequently if you notice a decrease in water pressure or your machine is taking longer to heat up.

Related: How to descale nespresso vertuo

How to Clean a Nespresso Machine

It’s critical to clean your Nespresso machine on a regular basis.. In addition, it’s a good way to remove any build-up of coffee grounds or oils that can lead to a bad taste. To clean your machine, you’ll need to descale it first. This will remove any mineral deposits that can clog the pipes and reduce water pressure. 

After your machine is descaled as we mention above, you can clean it with a damp cloth. Wipe down the machine’s exterior, as well as the coffee grinder and bean container. You can also use a toothbrush to clean any hard-to-reach areas. If you notice any build-up of coffee grounds or oils, you can clean these with a vinegar solution. Simply mix equal parts vinegar and water and use this to scrub away the build-up. Rinse well afterward with water.

Tips on how to avoid future Nespresso problems

To keep your machine in good working order, it’s important to do: 

  • Make sure to descale your machine regularly.
  • Use filtered water to make your coffee.
  • Use fresh, high-quality coffee beans.
  • Follow the cleaning instructions in your owner’s manual.
  • If you have an automatic shut-off feature, make sure it is turned off.

With proper care and maintenance, your machine should give you years of trouble-free operation!


If you are experiencing any difficulties with your Nespresso troubleshooting, we hope the fixing tips in this blog post have been of some help. However, if the problem persists or is not covered in this article, please do not hesitate to contact our team for further assistance. We want you to be able to enjoy a perfect cup of coffee every time and will be more than happy to help resolve any issues you may be having. Thanks for reading!


How do I reset my Nespresso machine?

If you need to reset your Nespresso machine, then the first thing you’ll need to do is unplug it from the power outlet. Next, press and hold the button on the top of the machine for 10 seconds. After that, plug the machine back in and turn it on. The reset process is now complete.

How long does a Nespresso machine last?

Nespresso machines are designed to last for years with proper care and maintenance. However, the lifespan of a Nespresso machine will vary depending on how often it is used and how well it is cared for.

Why is my coffee machine not pumping water?

If your coffee machine is not pumping water, then the first thing you’ll need to do is check the water tank to make sure it is full. If it is, then check the pump. If the pump is not working, then you’ll need to contact a service technician for assistance.

How do I fix my Nespresso orange and red light?

There are a few reasons why your Nespresso machine may have an orange and red light. First, make sure the machine is switched on and that the power cable is connected. If it isn’t, the machine will be unable to brew. The next step is to see if the water tank needs refilling. If it is, then you’ll need to refill it before the machine will work. Finally, if the water tank is full and the machine is still not working, then there may be an issue with the heating element.

What are the different parts of a Nespresso machine?

The different parts of a Nespresso machine include the water tank, coffee grounds container, drip tray, brewing chamber, and pump.

– The water tank is where you’ll add water to be used for brewing.

– The coffee grounds container holds the used coffee grounds after brewing.

– The drip tray catches any drips or spills during the brewing process.

– The brewing chamber is where the coffee grounds and water are combined to brew the coffee.

– The pump provides the pressure needed to brew the coffee.

How do I fix a Nespresso that won’t dispense?

If your Nespresso machine is having trouble dispensing, the first thing you’ll need to do is check the water tank. Make sure it is full and that the machine is switched on. If the problem persists, then you can try descaling the machine. This will remove any mineral deposits that may be clogging the pipes and reduce water pressure. If that doesn’t solve the problem, then you may need to contact a service technician for assistance.

Is it safe to use CLR to descale my Nespresso machine?

Yes, it is safe to use CLR to descale your Nespresso machine. CLR is a powerful cleaning agent that can quickly remove mineral deposits and build-up from your machine.

To descale your machine with CLR, combine equal portions of CLR and water in a mixing bowl. Then, using a clean cloth, wipe down the outside of the machine. Wipe out the drip tray, coffee grounds container, and brew chamber after each stage. Finally, run a brewing cycle with only water to rinse away the CLR solution.

Can I use baking soda to descale my Nespresso machine?

Yes, you can use baking soda to descale your Nespresso machine. Simply mix equal parts baking soda and water and use this solution to scrub away any mineral deposits.

Leave a Reply

Your email address will not be published. Required fields are marked *